ร่วมเป็นตัวแทนจำหน่าย
เป็นผู้สมัคร
ฉลากส่วนตัว
Redefining the true meaning of a hyper-smooth surface.
ULTRA-SMOOTH.
SLICKNESS
PERFECT BALANCE OF HARDNESS & SLICKNESS
Autotriz Top Coat 2.0 is a new advancement in nanotechnology to bring a hyper smooth, super glossy, and easy to apply coating. Utilizing Si-N-H polymer with organic residue, Autotriz Top Coat 2.0 provides increased resistance to dust, water spots and road grime.
THE TOUCH OF SATISFACTION
The most prominent layer of enhancement for a hyper-smooth surface with added protection and prolonged performance.
COMMON PROBLEMS WITHOUT TOP COAT
Dust
Dust build-up on the surface
Water Spots
Accumulation of heavy water spots
Smoothness
Reduced smoothness
ประโยชน์
Surface Ionized Technology
Advanced Polysilazane formula with surface ionized technology, producing a super-glossy effect which eliminates surface dust from building up
Hyper Smooth Finishing
Advanced nanotechnology emphasizes smoothness to ensure a hyper-smooth and slick effect.
Enhance Performance
Enhance base coat performance and durability such as hydrophobicity, smoothness, extra resistant, and more.
Ultimate Surface Protection
Advanced Polysilazane polymer that combines robust ceramic protection in emphasizing smoothness, eliminate surface contamination, and eliminates water spotting.
ฟีเจอร์หลัก
Hyper Smooth
Ensures a super slick and hyper-smooth surface that repels dirt.
High Gloss
Improves the shine and enhances the surface's color.
Super Hydrophobic
Protects the surface with a long-lasting super hydrophobic layer.
Easy-to-Clean
Improves cleaning experience as dirt can be washed off easily.
Stain Protection
Resistance to oil, sap, bird drops, and watermark.
Scratch Protection
Minimize/reduce surface scratches caused by road elements.
คำแนะนำสำหรับการใช้งาน
Shake well before use.
Get ready with 3 pieces of a brand-new, lint-free microfiber towel.
When first applying AUTOTRIZ Top Coat on a substrate, it is recommended to condition the surface of the applicator block with 7-8 drops to prevent skipping or dry spots.
Do not work on a large area at a time. It is recommended to do a 1.5 ft. x 1.5 ft. at a time.
Apply AUTOTRIZ Top Coat using normal pressure on the applicator. Make sure the area is well covered. Always start from an edge to avoid excess on other panels. Work in controlled areas to remember where you previously applied. Work in horizontal or vertical movements to ensure that product is carried through consistently.
Use the first towel to immediately level the product.
Go immediately over with a second microfiber towel with a polishing motion until the surface is free from residue.
Follow by the third towel (the “insurance towel”) and go over the surface one extra time just to make sure you haven’t missed any streaks or excess residue.
When the whole car is applied, allow the curing of the coating to begin. Wait approximately 60 minutes before delivery of the car to customers. Curing times depend on temperature and humidity.
INSPECTION LIGHTING SYSTEM
Lighting is of utmost importance during the application of a coating to paint. Spot Light like Scangrip is a good lighting system to inspect paint defects during polishing but in fact, it is NOT RECOMMENDED to use to check the residue of coating left on the paint. The suitable lighting system is Diffused Light.
เข้าร่วมกับเรา
สนใจเป็น
พันธมิตรของออโตทริซ?
หากคุณสนใจในผลิตภัณฑ์ของเราหรือกระตือรือร้นที่จะร่วมงานกับเรา ส่งข้อความถึงเรา แล้วเราจะติดต่อคุณเพื่อนัดหมายการโทรด่วน หรือติดต่อเราทางอีเมลของเราที่ info@auto-triz.com
เมื่อได้รับข้อมูลนี้แล้ว ทีมงานของเราจะตรวจสอบบัญชีและติดต่อคุณ